JVC Camcorder Repair
logo
Professional Digital Camcorder Repair Service
   

Common Error Codes and Symptoms.
   

   
   
   
Request Service Request Service
 
   
Professional Video Equipment Professional
 
   
Consumer Video Equipment Consumer
 
   
Purchase Purchase Equipment
 
   
Purchase BGA Rework
 

 

     Home > Services > Consumer > Camcorder > JVC

Our technicians at AV Repair have over 35 combined years of experience in repairing JVC camcorders. With quality service and workmanship guarantees of up to ONE FULL YEAR*, both parts and labor, you'll get more usage out of your camcorder, and more bang for your buck.

You can find our labor rates here, so the only question would be the cost of parts. Once your unit is on the bench, we'll be able to determine just that, and contact you with all of the costs involved, and how long your unit's stay with us will be, all before any charges become due.


Here are some common JVC Error codes:

E01 Tape load / unload time-out E02 Supply reel error
E03 Take-up error E04 Cylinder error
E06 Capstan error No Picture in Camera mode
Camcorder Eats Tapes Dew Detected

How much do you charge for estimates?
How much do you charge for return shipping?
What do I do next?


 
E01 Tape load / unload time-out  ^ Top

Generally it's a mechanical problem, with defective gears/ levers in the tape loading mechanism. You can expect to pay intermediate to major labor for this type of repair, plus the cost of parts.

 
 
 
E02 Supply reel error  ^ Top

Almost always a mechanical fault of some time, which generally requires the replacement of parts. On occasion, this symptom can also be caused by an electrical problem. You can expect to pay intermediate to major labor for this type of repair, plus the cost of parts.

 
 
 
E03 Take-up error  ^ Top

Almost always a mechanical fault of some time, which generally requires the replacement of parts in the mechanics. Other times, this is an electrical problem that mimics a mechanical fault. You can expect to pay intermediate to major labor for this type of repair, plus the cost of parts.

 
 
 
E04 Cylinder error  ^ Top

Very common. Problem is more than likely due to cold solder on the cylinder drive PC board. Re-flowing the solder solves this problem. Labor is typically intermediate to major to repair this problem.

 
 
 
E06 Capstan error  ^ Top

Generally either a defective capstan motor, or cold solder connections. Labor can be intermediate to major.

 
 
 
No Picture in Camera mode (All models)  ^ Top

Can be a defective CCD imager, a defective lens, or electrical connections that have been broken. Depending upon which of these your camcorder has, labor will vary between minor to major, and then you have the cost of parts, if needed.

 
 
 
Camcorder Eats Tapes  ^ Top

Defective idler assembly, reel table, or debris on the tape path. Incorrect back tension. Labor is intermediate to major, with parts averaging $65.00.

 
 
 
Dew Detected  ^ Top

Either a defective dew sensor, or cold solder. You can expect to pay intermediate to major labor. Dew sensors are approx. $20.00.

 
 
 
How much do you charge for estimates?  ^ Top

The estimate fee is $30.00, and is waived if your unit is repaired. That's fair, isn't it?

 
 
 
How much do you charge for return shipping?  ^ Top

We generally use UPS to do all of our shipping. On average, return shipping with insurance costs $10.50.  We only tack on a buck for the new box, bubble bag, and packing material. For the heavier, more expensive cameras, return shipping costs do increase, depending upon both their weight, and value.

If you'd prefer to use your UPS account number when shipping, simply let us know...

Once your contacted with the estimate, simply let us know what method of UPS return shipping you would prefer. If there is no preference mentioned, we automatically ship regular UPS GROUND, insured for value.

 
 
 
What do I do next?
  ^ Top

If you would like to use our services, simply click here, or click the Request Service on the Navigation bar, to continue.

 
 
 
Labor Rates  ^ Top
    Analog Digital  
 
  Camcorder Cleaning
$50.00 $60.00  
         
 
  Camcorder Repair - (Minor)
$90.00 $120.00  
         
 
  Camcorder Repair - (Intermediate)
$120.00 $150.00  
         
 
  Camcorder Repair - (Major)
$150.00 /up $180.00 /up  
  Labor Rates Exclude Parts.
All Camcorder Repairs Include Cleaning, Lubrication, and a six month warranty.
*ONE YEAR WARRANTY available if optional repairs are approved - Simply inquire.
 
 

JVC Camcorder Repair and Digital Camcorder Repair

 

 

Home  |  About Us  |  Pro Video  |  Consumer Video |  Consumer Camera  |  Contact Us  |  Store  |  Testimonials  |  Links  |  FAQ's  |  Privacy Policy  |  Copyright  |  Site Map

 
© 2004-2008 AV Repair, Inc.     All Rights Reserved.